Pneumatic Indicating Controller - Re-manufactured Part no. 43AP-FA44C/PB-PF/ECEPCO11442B

43AP-FA44C/PB-PF / ECEPCO11442B Pneumatic Indicating Controller FUNCTION: Case Material: Glass Fiber Reinforced Polyester Mounting: Field (Pipe or Yoke) Control Mode: Proportional + Integral (Reset) 0.01 to 50 Minutes per Repeat Output Signal and Gauge: 0.2 to 1.0 kg/cm2 Signal, 2 kg/cm2 Gauge Internal Transfer Switch: Bumpless w/2-Position Switch, Balance Gauge & Regulator Element Type: Gauge Pressure Element Gauge Pressure Element Type: 3" Diaphragm, Material: Cu-Ni-Mn, Ranges: 0-8 to 0-40" H20 3" Diaphragm: Range Limits: 0-20 to 0-25" H20 Engineering Cost Estimate Product: Provide Pipe Mounting Kit with Standard Brackets and 316 SS Mounting Hardware in Place of Standard Mounting Hardware Scale: 0-500 MM H2O Calibration: 0-500 MM H2O Remanufactured Instrument Warranty: 2 Years from Date of Installation This item specification is now only available in remanufactured condition. The re-manufacturing process is described as follows: “REMANUFACTURING involves breaking a part down into its individual components, restoring each usable element, and placing the parts into stock. Later, those parts are used to create newly specified products. These products are manufactured to published OEM specifications and thoroughly tested.” Code IAS-AG is not included in the coding, however this is for a filter regulator which is included in the instrument anyway, the appropriate line is highlighted above.